Resin Profile

Sonic Mega 8K

1. These resin parameters have been determined with a temperature of 25°C and a relative humidity of 75%. A test print was performed in a well-ventilated indoor space.
2. We used the Phrozen_XP_finder.stl (Download here) test print file to determine these resin parameters. Please use this STL file to test out the resin parameters before you begin printing. To learn more about how to dial in any resin with an XP_finder.
3. Phrozen Sonic Mega 8K is only able to read CTB files by Chitubox 1.9.0 or above. You may also use any other slicing software if you prefer to do so.
4. If your prints fail to stick onto the building plate, try increasing the bottom layer exposure time or check out our Help Center.
5. Please note that the size of your 3D prints will affect the resin parameter settings. Want more Sonic Mega 8K printing tips? Then click here! Before you begin printing, please make sure that there is no resin residue left on the building plate or in the resin vat.


Phrozen Resins

BASF Forward AM