Phrozen Sonic Mighty Revo 16K MAX LCD 3D-Drucker
Revo MAX und zugehöriges Zubehör werden bis Ende Dezember ausgeliefert.
Revo MAX und zugehöriges Zubehör werden bis Ende Dezember ausgeliefert.
Vorteile
Vorteile
- 14” 16K LCD: Drucken Sie größere Garagenmodelle, volle Miniaturarmeen und High-Detail-Charges, ohne an Qualität zu verlieren.
- Großer 2L Harzbehälter: Füllen Sie bis zu 2.5 Flaschen auf einmal und drucken Sie über Nacht ohne Nachfüllen, ohne auf ein automatisches Harzzufuhrsystem angewiesen zu sein.
- Dual Heizsystem: Dual-Fankammerheizung bringt die Kammer schnell zu 30°C, und die optionale beheizte Harzwanne erwärmt das Harz direkt für den stationäreren Druck in Kühlräumen und mit dickeren Harzen.
- 1080p Top-Down Kamera mit AI Farbkorrektur: Überwachen Sie den Volldruck klar von oben, mit weniger toten Flecken, genauerer Farbe und einfacheren Fernkontrollen von Ihrem Telefon.
- Quick-Release-Film: Ersetzen Sie den Release-Film in nur 3 Minuten mit weniger Schritten und ohne Screw-by-Screw-Film-Setup, was dazu beiträgt, Wartungszeiten und Druckerausfallzeiten zu reduzieren.
- Power-Loss Recovery und Smart Alerts: Werden Sie benachrichtigt, wenn Probleme auftreten, nach Ausfällen wieder aufnehmen und lange Drucke auf Kurs halten.
Verfügbarkeit für Abholungen konnte nicht geladen werden
Versand und Zollgebühren
-
Jetzt verfügbare Länder: Frankreich, Deutschland, Italien, Spanien, Polen, Tschechische Republik, Niederlande, Slowakei, Bulgarien, Kroatien, Zypern, Dänemark, Estland, Finnland, Griechenland, Irland, Lettland, Litauen, Luxemburg, Malta, Portugal, Rumänien, Slowenien und Schweden.
- In einigen Ländern ist eine Importlizenz erforderlich. Click here für Details.
- Der Kaufpreis schließt Tarife und Versandkosten aus. Keine Rückerstattung wird zur Verfügung gestellt, wenn ein Kunde sich weigert, sein Produkt (s) aufgrund von Zollgebühren, Zöllen oder anderen damit verbundenen Kosten abzuholen oder zurückzugeben.
- Die Kunden sind für die Zollabfertigung in allen Ländern verantwortlich.
- Versandkosten variieren je nach Land; siehe unsere Check-out-Seite für Details.
- Für weitere Informationen lesen Sie bitte unsere Shipping Policy Seite.
Schifffahrtsmeldung: In-Stock-Artikel werden priorisiert und angeordnet, um zuerst zu versenden. Out-of-Stock-Artikel werden ausgeliefert einmal verfügbar.
Rückgabe und Garantie
- Nach dem Verbraucherschutzgesetz haben Sie die Möglichkeit, innerhalb von 13 Tagen eine Rückerstattung zu beantragen. Bitte beachten Sie jedoch, dass die Erstattung nicht die Versandkosten und Steuer-/MwSt.-Gebühren abdeckt. Phrozen Support Center Innerhalb dieses 13-tägigen Zeitrahmens ist es wichtig sicherzustellen, dass das Produkt in seinem ursprünglichen Zustand zurückgegeben wird und die gesamte Chargenbestellung zurückgeschickt werden muss. Seite Rückerstattungsrichtlinie.
-
Alle Produkte, die von der offiziellen Website von Phrozen gekauft werden, sind unter anderen Bedingungen garantiert. Phrozen bietet eine einjährige Garantie für alle unsere Produkte mit Ausnahme von Verbrauchsmaterialien und Komponenten; dazu gehören der LCD-Bildschirm und der FEP-Film. LCD-Bildschirme für Sonic Mighty 8K, Sonic Mini 8K, Sonic Mega 8K, Sonic Mini 4K und Sonic 4K sind unter einer 3-monatigen Garantie abgedeckt. Für weitere Details lesen Sie bitte unsere Seite Garantie.
*Kind Erinnerung: Wir empfehlen, unsere Drucker mit Phrozen-Harzen zu koppeln, um Oberflächenlackschäden zu verhindern.
Besonderheiten
Besonderheiten
Engineered for Every Print, Start to Finish
印得大,也印得細
14”大尺寸 × 16K高解析
30秒快速換膜
少拆少調,維護更輕鬆
2.5瓶樹脂一次加
跨夜不用補料,安心睡
腔體&料槽雙加熱
低溫、高黏度樹脂都穩印
1080P高清攝影
AI校色、清晰監控無死角
防漏、防噴濺
減少漏液髒亂,清理更省事
14" 16K
Ultra-Fine Details at Full Scale
2000ml Vat
Fewer Refills, Longer Prints
Dual Heating
Chamber + Resin Vat Heating
Quick-Release Film
3 Minutes, No Tools Needed
360° Protection
No Leaks, No Mess, Easy Cleanup
Zero Blind Spots
1080p Camera, AI Color Correction
* Actual bottle count may vary by resin density. The 2.5-bottle estimate is based on Aqua Hyperfine Resin (Graphite Gray).
See Revo MAX in Action
Real results from a creator printing with Revo MAX.
Revo MAX Print Showcase
See how Revo MAX balances size and detail on large-scale prints, through builds from fellow makers.
Big. Productive. Stable.

Print Bigger, Assemble Less
A 14" LCD paired with a 302.4 × 161.98 × 300 mm build volume fits more parts per print, so large models need less splitting. Fewer print runs, fewer pieces to match, and less assembly work, giving creators, studios, and print service providers a faster path to finished pieces.

16K High Definition,
Print Big Without Losing Detail
The Revo MAX's 16K resolution captures ultra-fine detail, with anti-aliasing smoothing curves and edges, and supports single print files up to 10GB for large-scale projects. From textures to figurines and jewelry engravings, results stay sharp for miniature sculptors and jewelry designers.
*Model: Izat’al, Dragon Empress| Designed by Loot Studios|Painted by Yong Cheng
*Model 2: Whisper Mimic, Designed by Neo


Steadier Temperature, Steadier Prints
Cold rooms and high-viscosity resins need steady temperature control. Revo MAX combines dual-heat chamber with an optional heated resin vat to regulate temperature, while smart detection catches drops for reliable prints.

Standard: Dual-Fan Chamber Heater
Fast Heating to 30°C
The dual-fan chamber heater quickly brings the chamber to 30°C, helping users in cold-climate regions keep resin stable from the start of every print.
Add-On: Heated Resin Vat
High-Viscosity Resins, Stable Prints
The optional heated resin vat stabilizes resin flow, helping professionals print high-viscosity engineering resins with more consistent results.
Add to cart nowWas macht Revo MAX einfacher zu bedienen
Print Longer, Swap Faster
What slows your workflow down usually isn't print time; it's the constant refills and material swaps.
Revo MAX solves both with a bigger resin vat and quick-release film.
* Actual bottle count may vary by resin density. The 2.5-bottle estimate is based on Aqua Hyperfine Resin (Graphite Gray).
** Use Phrozen’s original pre-cut Quick-Swap Release Film for proper fit and tension.
Build Plate Handling, Simplified.
An all-metal build plate, upgraded for easier removal, drainage, and cleanup, for simpler and smoother handling.

Cleanup - Sloped Design, Faster Cleanup
The sloped surface helps resin flow back during printing, leaving less resin on top of the build plate afterward. The build plate also fits directly into the Mega Wash S for fast, automated cleaning.
From Removal to Draining to Cleanup, Every Step Feels Smoother
Revo MAX's build platform gets a full upgrade, now easier to grip, cleaner draining, and faster cleanup.
不在機台旁,也能掌握所有列印狀況
搭配 Phrozen GO App,你可以遠端選檔、控制列印、查看即時畫面,印完還能直接回看或分享縮時影片。異常通知、耗材提醒與多機管理也都整合在手機裡,長時間列印或跨夜任務,不用來回跑機台,也不怕錯過任何異常。
Fewer Surprises, More Uptime
From hardware safeguards to system alerts, Revo MAX catches common print risks at every layer.
不在機台旁,也能掌握所有列印狀況
搭配 Phrozen GO App,你可以遠端選檔、控制列印、查看即時畫面,印完還能直接回看或分享縮時影片。異常通知、耗材提醒與多機管理也都整合在手機裡,長時間列印或跨夜任務,不用來回跑機台,也不怕錯過任何異常。
No More Second-Guessing on Settings
Leveling, guided setup, and exposure testing are all built into the screen, so even first-time users can get it right the first time.
Pressure-Sensing Leveling
Pressure and color indicators mark all four corners, making precise adjustments simple.

Step-by-Step Guide
On-screen guidance covers the setup process, backed by QR video tutorials, no experience needed.

Zonal Exposure Test
Test multiple exposure settings at once and compare results side by side for faster resin dial-in.


The screen shows pressure readings and color indicators for all four zones, just follow the on-screen guidance to adjust each corner. No experience needed, leveling is easy to get right.

Step-by-step on-screen guidance paired with QR code video tutorials covers everything from basic setup to material swaps, so even first-time users can follow along smoothly.

Run multiple exposure settings in a single test and compare the results side by side, no more repeated test prints, just a faster way to land on the right resin settings.
Clear, Accurate Monitoring, Every Time

Clear, Accurate Monitoring, Every Time
1080p Vertical Camera, No Blind Spots
Horizontal, low-quality cameras blur the view, leaving blind spots hiding failures. Revo MAX's 1080p vertical camera keeps detail sharp, letting you check long or overnight prints from anywhere without walking to the printer.
AI Color Correction with Zero-UV LED
Snapshots and time-lapse footage can look dim and color shifted. Zero-UV LEDs light the chamber evenly without affecting curing, and AI color correction fixes color shift so footage matches the model's true color.
Revo MAX Print Showcase
See how Revo MAX balances size and detail on large-scale prints, through builds from fellow makers.
Big. Productive. Stable.

Print Bigger, Assemble Less
A 14" LCD paired with a 302.4 × 161.98 × 300 mm build volume fits more parts per print, so large models need less splitting. Fewer print runs, fewer pieces to match, and less assembly work, giving creators, studios, and print service providers a faster path to finished pieces.

16K High Definition,
Print Big Without Losing Detail
The Revo MAX's 16K resolution captures ultra-fine detail, with anti-aliasing smoothing curves and edges, and supports single print files up to 10GB for large-scale projects. From textures to figurines and jewelry engravings, results stay sharp for miniature sculptors and jewelry designers.
*Model: Izat’al, Dragon Empress| Designed by Loot Studios|Painted by Yong Cheng
*Model 2: Whisper Mimic, Designed by Neo


Steadier Temperature, Steadier Prints
Cold rooms and high-viscosity resins need steady temperature control. Revo MAX combines dual-heat chamber with an optional heated resin vat to regulate temperature, while smart detection catches drops for reliable prints.

Standard: Dual-Fan Chamber Heater
Fast Heating to 30°C
The dual-fan chamber heater quickly brings the chamber to 30°C, helping users in cold-climate regions keep resin stable from the start of every print.
Add-On: Heated Resin Vat
High-Viscosity Resins, Stable Prints
The optional heated resin vat stabilizes resin flow, helping professionals print high-viscosity engineering resins with more consistent results.
Add to cart now天天印大件的人,才懂這些小細節有多重要
挑選大尺寸機台不能只看列印規格,Revo MAX 從上蓋、載台、防護到操作介面設計,所有能讓大件列印更方便的細節都顧到,幫你減少意外、降低保養負擔,長時間操作舒服又輕鬆。
Stay in Control Even on the Go
The Phrozen GO App lets you control prints and check the live camera from your phone. You can also review or share time-lapse videos after printing. Error notifications, material reminders, and multi-machine management are all handled from the same app.

Technische Spezifikationen
- Drucktechnologie: MSLA (LCD)
- LCD : Mono LCD 14"
- XY-Auflösung: 20*26 μm (16K)
- Lichtquelle: 405nm ParaLED® Matrix 3.0
- Release Film: nFEP Film
- Schichtdicke: 0.01-0.2 mm
- Bedienbildschirm: 5"
- Konnektivität: USB, Wi-Fi, Ethernet
- Bauvolumen: 302.4 × 161.98 × 300 mm
- Druckergröße : 520 x 450 x 627 mm
- Druckergewicht: 29 kg
Which One Fits Your Workflow?
Mighty Revo 16K · Mighty Revo MAX · Mega 8K S — Spec Comparison
| Spec | Mighty Revo 16K | Mighty Revo MAX | Mega 8K S |
|---|---|---|---|
| Technical Specs | |||
| LCD | 10.1" 16K | 14" 16K | 15" 8K |
| Light Source | 405nm / COB + Fresnel Lens | 405nm ParaLED® Matrix 3 0 | 405nm ParaLED® Matrix 3 0 |
| XY Resolution | 14 × 19 μm | 20 × 26 μm | 43 μm |
| Build Volume (mm) | 211.68 × 118.37 × 235 | 302.4 × 161.98 × 300 | 330 × 185 × 300 |
| Release Film | nFEP (PFA) | nFEP (PFA) *quick-release | ACF Film |
| Heating System | Chamber single-fan heating | ★Chamber + Vat (Add-on Required) | ✕ |
| Heating Temperature | 30°C | 30°C | ✕ |
| Hardware Specs | Camera | 720P | ★1080P Vertical Camera + AI Color Calibration | ✕ |
| Resin Vat Capacity | 0.67L | ★2L (≈2.5 bottles) | —*No MAX line marked, cannot be standardized measured (less than 2L) |
| Quick-Release Build Plate | ✕ | ✓ | ✕ |
| Quick-Release Film | ✕ | ✓ | ✕ |
| Quick-Release LCD | ✓ | ✓ | ✕ |
| AA (Anti-Aliasing) | ✕ | ✓ | ✓ |
| Power-Loss Resume | ✕ | ✓ | ✕ |
| Operating Screen | 5" | 5" (720p) | 3.5" |
| Connectivity | USB, Wi-Fi, Ethernet | USB, WIFI, Ethernet | USB, Wi-Fi |
| Rail | Dual Rails (Ball Screw) | Dual Rails (Lead Screw) | Dual Rails (Ball Screw) |
| Machine Dimensions (mm) | 353 × 345 × 517 | 520 × 450 × 627 | 472 × 380 × 566 |
| Weight | 18.2 kg | 29 kg | 26 kg |
*quick-release
(≈2.5 bottles)
*No MAX line, <2L, not standardized
Häufig gestellte Fragen
Warum wir Revo MAX auf diese Weise gebaut haben
Was ist der Unterschied zwischen Revo MAX und Revo 16K?
Was ist der Unterschied zwischen Revo MAX und Revo 16K?
Warum hat Revo MAX kein automatisches Harznachfüllsystem?
Warum hat Revo MAX kein automatisches Harznachfüllsystem?
Wie hilft Revo MAX bei kalten Räumen oder hochviskosen Harzen?
Wie hilft Revo MAX bei kalten Räumen oder hochviskosen Harzen?
Kann Revo MAX nach einem plötzlichen Stromausfall wieder drucken?
Kann Revo MAX nach einem plötzlichen Stromausfall wieder drucken?
Wann sollte ich die Kammerheizung oder den erhitzten Harzbehälter verwenden?
Wann sollte ich die Kammerheizung oder den erhitzten Harzbehälter verwenden?
Beeinflusst der erhitzte Harzbehälter die LCD-Lebensdauer?
Beeinflusst der erhitzte Harzbehälter die LCD-Lebensdauer?
Wartung & Support | Wird es im Laufe der Zeit problematisch sein?
Ist es schwierig, das LCD zu ersetzen?
Ist es schwierig, das LCD zu ersetzen?
Welche Releasefolie sollte ich mit jedem Revo MAX Harzbehälter verwenden?
Welche Releasefolie sollte ich mit jedem Revo MAX Harzbehälter verwenden?
Revo MAX hat zwei Fässer. Der Standard-Quick-Swap-Vat verwendet Phrozen PFA (nFEPQuick-Swap Release Film mit vorgeschnittenen Löchern und einer Silikonfolie; in der optional beheizten Wanne wird die passende, abziehbare Schutzfolie von Phrozen verwendet.
Sind Ersatzteile leicht zu finden und zu ersetzen?
Sind Ersatzteile leicht zu finden und zu ersetzen?
Schlüsselteile wie PFA-Film, LCDs und Harzbehälter sind über Phrozen und autorisierte Wiederverkäufer erhältlich. Quick-Release-Designs und Lifetime-Tracking erleichtern die Wartung.










































