⚡ Black Friday Verkauf⚡  Up bis 50% Off + Kostenloser Versand auf €299+ · Enden Nov 30 

Phrozen Sonic Mighty Revo 16K MAX LCD 3D-Drucker

Revo MAX und zugehöriges Zubehör werden bis Ende Dezember ausgeliefert.

€1.713,60
inkl. MwSt. Versand wird beim Checkout berechnet.

Revo MAX und zugehöriges Zubehör werden bis Ende Dezember ausgeliefert.

Vorteile

  • 14” 16K LCD: Drucken Sie größere Garagenmodelle, volle Miniaturarmeen und High-Detail-Charges, ohne an Qualität zu verlieren.
  • Großer 2L Harzbehälter: Füllen Sie bis zu 2.5 Flaschen auf einmal und drucken Sie über Nacht ohne Nachfüllen, ohne auf ein automatisches Harzzufuhrsystem angewiesen zu sein.
  • Dual Heizsystem: Dual-Fankammerheizung bringt die Kammer schnell zu 30°C, und die optionale beheizte Harzwanne erwärmt das Harz direkt für den stationäreren Druck in Kühlräumen und mit dickeren Harzen.
  • 1080p Top-Down Kamera mit AI Farbkorrektur: Überwachen Sie den Volldruck klar von oben, mit weniger toten Flecken, genauerer Farbe und einfacheren Fernkontrollen von Ihrem Telefon.
  • Quick-Release-Film: Ersetzen Sie den Release-Film in nur 3 Minuten mit weniger Schritten und ohne Screw-by-Screw-Film-Setup, was dazu beiträgt, Wartungszeiten und Druckerausfallzeiten zu reduzieren.
  • Power-Loss Recovery und Smart Alerts: Werden Sie benachrichtigt, wenn Probleme auftreten, nach Ausfällen wieder aufnehmen und lange Drucke auf Kurs halten.
Versand und Zollgebühren
Rückgabe und Garantie

Besonderheiten

Revo MAX ist Phrozens größter 14-Zoll-16K-LCD-Harzdrucker, der für Entwickler und Studios entwickelt wurde, die größer drucken, länger drucken und weniger Zeit mit der Verwaltung der Maschine verbringen müssen. 

Drucken Sie große Heldenmodelle oder volle Miniaturarmeen in weniger Auflagen. Der 2L-Vat unterstützt das Übernachtdrucken, Smart Dual Heating hält die Ergebnisse stabil und die 1080p vertikale Kamera mit KI-Farbkorrektur können Sie jeden Auftrag klar von Ihrem Telefon aus überprüfen. 

Am besten geeignet für Druckstudios, Schmuckdesigner, Kommissionsdruckunternehmen und Prototyping-Teams, die bereit sind für einen größeren, zuverlässigeren Harzdruck-Workflow. 

Kernspezifikationen: 14-Zoll-16K LCD | Großes 2L-Harzvat | Dual Heizsystem | 1080p Top-Down-Kamera | AI Farbkorrektur 


Engineered for Every Print, Start to Finish

印得大,也印得細

14”大尺寸 × 16K高解析

30秒快速換膜

少拆少調,維護更輕鬆

2.5瓶樹脂一次加

跨夜不用補料,安心睡

腔體&料槽雙加熱

低溫、高黏度樹脂都穩印

1080P高清攝影

AI校色、清晰監控無死角

防漏、防噴濺

減少漏液髒亂,清理更省事

14" 16K

Ultra-Fine Details at Full Scale

2000ml Vat

Fewer Refills, Longer Prints

Dual Heating

Chamber + Resin Vat Heating

Quick-Release Film

3 Minutes, No Tools Needed

360° Protection

No Leaks, No Mess, Easy Cleanup

Zero Blind Spots

1080p Camera, AI Color Correction

* Actual bottle count may vary by resin density. The 2.5-bottle estimate is based on Aqua Hyperfine Resin (Graphite Gray).

Explore More ↗

See Revo MAX in Action

Real results from a creator printing with Revo MAX.

Big. Productive. Stable.

列印空間_2000x2000.png__PID:6d654216-b9a9-40c4-9e1a-cefb8fe81b47

Print Bigger, Assemble Less

A 14" LCD paired with a 302.4 × 161.98 × 300 mm build volume fits more parts per print, so large models need less splitting. Fewer print runs, fewer pieces to match, and less assembly work, giving creators, studios, and print service providers a faster path to finished pieces.

列印空間_-1.jpg__PID:aae0c4da-d134-4bf4-98de-594b552c447d

16K High Definition,
Print Big Without Losing Detail

The Revo MAX's 16K resolution captures ultra-fine detail, with anti-aliasing smoothing curves and edges, and supports single print files up to 10GB for large-scale projects. From textures to figurines and jewelry engravings, results stay sharp for miniature sculptors and jewelry designers.

*Model: Izat’al, Dragon Empress| Designed by Loot Studios|Painted by Yong Cheng

*Model 2: Whisper Mimic, Designed by Neo

RevoMax_LP_Feature_應用模型_1600x900-2.jpg__PID:a60979ea-f1b4-4e9b-9a18-5f3849487e02RevoMax_LP_Feature_應用模型_1600x900-4.jpg__PID:7f759a99-4f05-4e83-a0b2-7c63ff44e679
六頭龍_2000x2000.png__PID:6751469b-7711-4ae9-850b-41e12bc156d7
六頭龍_2000x2000-2.png__PID:51469b77-11ba-4905-8b41-e12bc156d775
六頭龍_2000x2000-3.png__PID:469b7711-bae9-450b-81e1-2bc156d7757a
六頭龍_2000x2000-4.png__PID:9b7711ba-e905-4b41-a12b-c156d7757a21

Steadier Temperature, Steadier Prints

Cold rooms and high-viscosity resins need steady temperature control. Revo MAX combines dual-heat chamber with an optional heated resin vat to regulate temperature, while smart detection catches drops for reliable prints.

RevoMax_LP_Feature_2000x2000.png__PID:342e5264-a57f-46de-87eb-72541d21a07e

Standard: Dual-Fan Chamber Heater

Fast Heating to 30°C

The dual-fan chamber heater quickly brings the chamber to 30°C, helping users in cold-climate regions keep resin stable from the start of every print.

Add-On: Heated Resin Vat

High-Viscosity Resins, Stable Prints

The optional heated resin vat stabilizes resin flow, helping professionals print high-viscosity engineering resins with more consistent results.

Add to cart now

雙加熱更穩定

5分鐘快速升溫

25–40°C自由控溫

高黏度樹脂穩印

低溫穩定印

溫差異常提醒

Was macht Revo MAX einfacher zu bedienen 

Print Longer, Swap Faster

What slows your workflow down usually isn't print time; it's the constant refills and material swaps.
Revo MAX solves both with a bigger resin vat and quick-release film.

keyword_2000x2000_gif-料槽大容量.gif__PID:6384b0c5-7069-499e-aaec-3d29249c2443

2L Vat,Fewer Refills

The 2L resin vat holds approximately 2.5 bottles in a single fill, so long or overnight prints need less refilling. No resin-feeder, no extra pumps or tubing, just a simpler setup.

Grab an extra quick-release film resin vat →

keyword_2000x2000_gif-快拆離型膜.gif__PID:29fdbbad-7470-4299-b080-849f1ff0d7b8

Quick-Release Film,3-Minute Swap

Traditional film swaps can take up to 30 minutes, aligning holes and screwing them in. Revo MAX's quick-release design on all four sides gets it done in 3 minutes instead. Less maintenance, more printing.

Grab replacement film →

keyword_2000x2000_gif-快拆離型膜.gif__PID:29fdbbad-7470-4299-b080-849f1ff0d7b8

Wide Pouring Spout,Less Mess

The wide pouring spout gives you better control when pouring leftover resin back into the bottle. With fewer drips and spills, changing resins or cleaning the vat takes less effort.

  

* Actual bottle count may vary by resin density. The 2.5-bottle estimate is based on Aqua Hyperfine Resin (Graphite Gray).
** Use Phrozen’s original pre-cut Quick-Swap Release Film for proper fit and tension.

keyword_2000x2000_gif-料槽大容量.gif__PID:8a5f8258-b0aa-4c2f-94c5-1681c83b5a0d

一次加滿約 2.5 瓶,跨夜不用靠自動注料

2L 大容量樹脂槽,一次可加入約 2.5 瓶樹脂,長時間或跨夜列印不用一直補料。不用自動注料,也少了額外泵浦與管線,整體設計更簡單、操作更省事。

多買一組快拆膜樹脂槽→

keyword_2000x2000_gif-快拆離型膜.gif__PID:d8b14d4a-f030-441b-a819-dcf12d00c7ed

快拆換膜不累,3分鐘搞定

傳統換膜要對位、鎖孔、調張力,有些機型甚至要鎖上 64 顆螺絲。Revo MAX 採四邊快拆設計,約 3 分鐘即可完成換膜,少花時間在維護,快速回到下一次列印。

備膜耗材→

不怕臨時斷電,不用整批重印

RevoMax_LP_Feature_1600x900_斷電續印_CH.jpg__PID:503bc96f-8174-4d96-9c9f-1b164d567fbf

遇到異常斷電主動通知,來電後馬上繼續印,不用整批報廢重印。支援全球電壓,換地區使用免切換。

*註: 續印後若有留下層痕,可使用砂紙修復。

LCD 不怕刮,特殊塗層好清潔

RevoMax_LP_Feature_1600x900_鋼化玻璃.jpg__PID:39ab8724-84af-4b85-8f74-1317a222f601

Revo MAX 標配 LCD 鋼化保護層,不用擔心意外刮傷,樹脂沾到也不怕,特殊塗層一擦就乾淨。好清潔、好維護,讓 LCD 用得更久。

LCD 快拆設計,迅速換好

RevoMax_LP_Feature_1600x900_LCD快拆.jpg__PID:05743a9e-a42e-41fa-ba21-62a4ebad197b

LCD 更換不再需要大拆機。Revo MAX 採用快拆設計,可迅速完成拆裝,換更快、停機更短,維護不麻煩。

Build Plate Handling, Simplified.

An all-metal build plate, upgraded for easier removal, drainage, and cleanup, for simpler and smoother handling.

RevoMAX_1000x1000_載台快拆.gif__PID:9914e1fa-d2e4-41c7-9f40-d3e23e3be8c3

Removal - Snap-Lock and Large Handles

The snap-lock latch means no unscrewing when removing or reinstalling the build plate. Large handles on both sides keep the plate steady and secure in hand.

RevoMAX_1000x1000_載台懸掛.gif__PID:4ebca8f6-8c47-4f59-b0cc-c65dc524303f

Drainage - Hang and Drain

The build plate hangs directly inside the machine to drain. Resin drips back into the vat, while the lid can still close normally.

RevoMax_LP_Feature_載台_1000x1000.png__PID:50525954-ea48-4657-8d2c-4f5301dc71ba

Cleanup - Sloped Design, Faster Cleanup

The sloped surface helps resin flow back during printing, leaving less resin on top of the build plate afterward. The build plate also fits directly into the Mega Wash S for fast, automated cleaning.

From Removal to Draining to Cleanup, Every Step Feels Smoother

Revo MAX's build platform gets a full upgrade, now easier to grip, cleaner draining, and faster cleanup.

RevoMAX_1000x1000_載台快拆.gif__PID:9914e1fa-d2e4-41c7-9f40-d3e23e3be8c3

Snap-Lock Release + Dual Handles, Secure and Easy to Grip

Snap-lock, quick-release design means no more fumbling with screws. Large handles on both sides keep even big platforms steady and secure, with no slipping.

RevoMAX_1000x1000_載台懸掛.gif__PID:4ebca8f6-8c47-4f59-b0cc-c65dc524303f

Hanging Drip Rack, Hangs Securely in Place

The build platform hangs directly inside the machine to drain, no hand-holding needed. Resin drips back into the vat, and the lid still closes normally.

RevoMAX_1000x1000_載台滴料.gif__PID:cb14094e-c443-457a-96c4-b67acd5df117

Sloped Design, Less Buildup,
Faster Cleanup

The sloped surface lets leftover resin drain off on its own, cutting down on wipe-downs. It's also compatible with the Mega Wash S for machine washing.

不在機台旁,也能掌握所有列印狀況

搭配 Phrozen GO App,你可以遠端選檔、控制列印、查看即時畫面,印完還能直接回看或分享縮時影片。異常通知、耗材提醒與多機管理也都整合在手機裡,長時間列印或跨夜任務,不用來回跑機台,也不怕錯過任何異常。

Feature_智慧管家_500x500-05.png__PID:a1894c61-1709-45ab-b4cf-14c1413cc978

開始/暫停/續印控制

Feature_智慧管家_500x500-02.png__PID:dab414a1-894c-4117-8945-ab34cf14c141

多機台同時管理

Feature_智慧管家_500x500-3.png__PID:1630f2bf-7055-4f79-ae1e-e1b46a0f337c

即時監看/縮時影片

Feature_智慧管家_500x500-04.png__PID:14a1894c-6117-4945-ab34-cf14c1413cc9

加熱/ 照明開關遠端控制

Feature_智慧管家_500x500-06.png__PID:894c6117-0945-4b34-8f14-c1413cc978d9

異常狀況即時提醒

Fewer Surprises, More Uptime

From hardware safeguards to system alerts, Revo MAX catches common print risks at every layer.

RevoMax_LP_Feature_三大保護特點_2000x2000-01.png__PID:d39fa4b9-998b-462a-ba11-320e3e95482b

Triple Hardware Protection

A Z-axis guard, tempered glass LCD cover, and raised base help block resin spills and seepage into the machine.

 

RevoMax_LP_Feature_三大保護特點_2000x2000-02.png__PID:79491879-97d5-4397-b734-249d70fa7762

Power-Loss Recovery

If there is a sudden power loss, you will get an alert. Once power returns, printing resumes from where it left off, reducing the risk of reprinting.

*Note: Minor layer lines left after a print resumes can be smoothed out with light sanding.

RevoMax_LP_Feature_三大保護特點_2000x2000-03.png__PID:93187d58-7f47-44c6-90d7-0b5f0157cd8e

Real-Time Alerts

Get alerts for print failures and temperature drops, with tracking for Z-axis maintenance, LCD, and release film lifetime, keeping you informed.

 

不在機台旁,也能掌握所有列印狀況

搭配 Phrozen GO App,你可以遠端選檔、控制列印、查看即時畫面,印完還能直接回看或分享縮時影片。異常通知、耗材提醒與多機管理也都整合在手機裡,長時間列印或跨夜任務,不用來回跑機台,也不怕錯過任何異常。

Feature_智慧管家_500x500-05.png__PID:a1894c61-1709-45ab-b4cf-14c1413cc978

開始/暫停/續印控制

Feature_智慧管家_500x500-02.png__PID:dab414a1-894c-4117-8945-ab34cf14c141

多機台同時管理

Feature_智慧管家_500x500-3.png__PID:1630f2bf-7055-4f79-ae1e-e1b46a0f337c

即時監看/縮時影片

Feature_智慧管家_500x500-04.png__PID:14a1894c-6117-4945-ab34-cf14c1413cc9

加熱/ 照明開關遠端控制

Feature_智慧管家_500x500-06.png__PID:894c6117-0945-4b34-8f14-c1413cc978d9

異常狀況即時提醒

No More Second-Guessing on Settings

Leveling, guided setup, and exposure testing are all built into the screen, so even first-time users can get it right the first time.

Pressure-Sensing Leveling

Pressure and color indicators mark all four corners, making precise adjustments simple.

RevoMax_LP_Feature_四大特點_1600x900.jpg__PID:75e44a5a-a4b9-4653-a831-284b7975f336

Step-by-Step Guide

On-screen guidance covers the setup process, backed by QR video tutorials, no experience needed.

手動調平介面 英文.gif__PID:e817f7ea-70c4-41dc-91f0-5a82cf644bc8

Zonal Exposure Test

Test multiple exposure settings at once and compare results side by side for faster resin dial-in.

分區曝光.gif__PID:9e28b8b0-7037-442e-b2d8-a48e9b76fdd8
RevoMax_LP_Feature_四大特點_2000x2000_框線-4-1.png__PID:a8ef2d6e-31fa-43df-b2cb-235b7b769602

The screen shows pressure readings and color indicators for all four zones, just follow the on-screen guidance to adjust each corner. No experience needed, leveling is easy to get right.

RevoMax_LP_Feature_1600x900_LCD快拆.jpg__PID:45f9951e-430c-484b-9854-d2a02f5f7229

 Step-by-step on-screen guidance paired with QR code video tutorials covers everything from basic setup to material swaps, so even first-time users can follow along smoothly. 

RevoMax_LP_Feature_四大特點_2000x2000_框線-4-1.png__PID:a8ef2d6e-31fa-43df-b2cb-235b7b769602

Run multiple exposure settings in a single test and compare the results side by side, no more repeated test prints, just a faster way to land on the right resin settings.

Clear, Accurate Monitoring, Every Time

縮時攝影_1000x2000.png__PID:fd77e374-51be-45f1-bc39-79ae7f38f99d

Clear, Accurate Monitoring, Every Time

1080p Vertical Camera, No Blind Spots

Horizontal, low-quality cameras blur the view, leaving blind spots hiding failures. Revo MAX's 1080p vertical camera keeps detail sharp, letting you check long or overnight prints from anywhere without walking to the printer.

AI Color Correction with Zero-UV LED

Snapshots and time-lapse footage can look dim and color shifted. Zero-UV LEDs light the chamber evenly without affecting curing, and AI color correction fixes color shift so footage matches the model's true color.

Feature_高清攝影-01.png__PID:56ed2371-8fe7-435f-b920-5b632a185568

1080P 高清攝影,細節不漏看

Feature_1080攝影-02.png__PID:7194de73-8c11-4067-89d8-c57ec1d93207

直立式攝影,列印全程無死角

Feature_1080攝影-05.png__PID:de738c11-7067-49d8-857e-c1d93207e9e3

AI 自動校色,少色偏更精準

Feature_1080攝影-06.png__PID:8c117067-89d8-457e-81d9-3207e9e3c29e

零紫外光LED,更亮又不干擾固化

Feature_高清攝影-01.png__PID:4272ff33-a2dd-4074-a1de-8038d6bd1be2

1080P 高清攝影,細節不漏看

Feature_高清攝影-01.png__PID:4272ff33-a2dd-4074-a1de-8038d6bd1be2

1080P 高清攝影,細節不漏看

Feature_1080攝影-02.png__PID:381b9a60-6a89-4272-bf33-a2dd207421de

直立式攝影,列印全程無死角

Big. Productive. Stable.

列印空間_2000x2000.png__PID:6d654216-b9a9-40c4-9e1a-cefb8fe81b47

Print Bigger, Assemble Less

A 14" LCD paired with a 302.4 × 161.98 × 300 mm build volume fits more parts per print, so large models need less splitting. Fewer print runs, fewer pieces to match, and less assembly work, giving creators, studios, and print service providers a faster path to finished pieces.

列印空間_-1.jpg__PID:aae0c4da-d134-4bf4-98de-594b552c447d

16K High Definition,
Print Big Without Losing Detail

The Revo MAX's 16K resolution captures ultra-fine detail, with anti-aliasing smoothing curves and edges, and supports single print files up to 10GB for large-scale projects. From textures to figurines and jewelry engravings, results stay sharp for miniature sculptors and jewelry designers.

*Model: Izat’al, Dragon Empress| Designed by Loot Studios|Painted by Yong Cheng

*Model 2: Whisper Mimic, Designed by Neo

RevoMax_LP_Feature_應用模型_1600x900-2.jpg__PID:a60979ea-f1b4-4e9b-9a18-5f3849487e02RevoMax_LP_Feature_應用模型_1600x900-4.jpg__PID:7f759a99-4f05-4e83-a0b2-7c63ff44e679
六頭龍_2000x2000.png__PID:6751469b-7711-4ae9-850b-41e12bc156d7
六頭龍_2000x2000-2.png__PID:51469b77-11ba-4905-8b41-e12bc156d775
六頭龍_2000x2000-3.png__PID:469b7711-bae9-450b-81e1-2bc156d7757a
六頭龍_2000x2000-4.png__PID:9b7711ba-e905-4b41-a12b-c156d7757a21

Steadier Temperature, Steadier Prints

Cold rooms and high-viscosity resins need steady temperature control. Revo MAX combines dual-heat chamber with an optional heated resin vat to regulate temperature, while smart detection catches drops for reliable prints.

RevoMax_LP_Feature_2000x2000.png__PID:342e5264-a57f-46de-87eb-72541d21a07e

Standard: Dual-Fan Chamber Heater

Fast Heating to 30°C

The dual-fan chamber heater quickly brings the chamber to 30°C, helping users in cold-climate regions keep resin stable from the start of every print.

Add-On: Heated Resin Vat

High-Viscosity Resins, Stable Prints

The optional heated resin vat stabilizes resin flow, helping professionals print high-viscosity engineering resins with more consistent results.

Add to cart now

雙加熱更穩定

5分鐘快速升溫

25–40°C自由控溫

高黏度樹脂穩印

低溫穩定印

溫差異常提醒

天天印大件的人,才懂這些小細節有多重要

挑選大尺寸機台不能只看列印規格,Revo MAX 從上蓋、載台、防護到操作介面設計,所有能讓大件列印更方便的細節都顧到,幫你減少意外、降低保養負擔,長時間操作舒服又輕鬆。

RevoMax_LP_Feature_四大特點_2000x2000_框線-1.png__PID:3d578085-f944-4010-b2dd-5fdf75e0d4f3

載台設計更省事

卡扣快拆 + 雙提把,大件穩拿不手滑

斜頂設計,樹脂快速排淨,少刮少擦

懸掛滴架掛上後可關蓋,桌面不沾

載台直接機洗,搭配 Wash Mega S

RevoMax_LP_Feature_四大特點_2000x2000_框線-2_CH.png__PID:a286bde8-3c2e-410d-bb55-75ce83a04b73

多重防護,少意外好清理

Z 軸防護罩阻擋樹脂噴濺,不卡料

防漏液底座全面封住,樹脂不進機台

失敗 + 異物偵測,異常主動提醒

Z 軸、LCD 保養自動提醒不怕忘

RevoMax_LP_Feature_四大特點_2000x2000_框線-3.png__PID:6a5cb692-41c7-4f68-a817-1ff7d93fd734

上蓋設計舒適又省心

上蓋有氣密阻尼,鎖住樹脂異味不外露

抗靜電設計,樹脂少噴濺乾淨不髒亂

保溫、防塵、降噪,一蓋搞定

好開不夾手,開到哪停到哪,不掉蓋

RevoMax_LP_Feature_四大特點_2000x2000_框線-4-1_CH.png__PID:0a1c654c-4df4-4d2e-b990-b08fa6f06124

操作體驗更直覺

四區壓力偵測:校正不再只靠手感

720P螢幕晶片升級,畫面流暢不卡頓

四色進度狀態燈,遠遠看就知道機況

步驟教學 + 掃碼影片,新手快速上手

Stay in Control Even on the Go

The Phrozen GO App lets you control prints and check the live camera from your phone. You can also review or share time-lapse videos after printing. Error notifications, material reminders, and multi-machine management are all handled from the same app.

Feature_智慧管家_500x500-05.png__PID:a1894c61-1709-45ab-b4cf-14c1413cc978

開始/暫停/續印控制

Feature_智慧管家_500x500-02.png__PID:dab414a1-894c-4117-8945-ab34cf14c141

多機台同時管理

Feature_智慧管家_500x500-3.png__PID:1630f2bf-7055-4f79-ae1e-e1b46a0f337c

即時監看/縮時影片

Feature_智慧管家_500x500-04.png__PID:14a1894c-6117-4945-ab34-cf14c1413cc9

加熱/ 照明開關遠端控制

Feature_智慧管家_500x500-06.png__PID:894c6117-0945-4b34-8f14-c1413cc978d9

異常狀況即時提醒

Es ist nicht nur ein Drucker, es ist ein vollständiges Ökosystem

Von der Modellierung bis zum Drucken, Waschen, Aushärten und Einrichten des Arbeitsbereichs haben Sie das Zubehör von Revo MAX abgedeckt. Nicht mehr Ihr eigenes Setup zusammensetzen, nur ein reibungsloserer Druckprozess, beginnen bis Ende.

Technische Spezifikationen

  • Drucktechnologie: MSLA (LCD)
  • LCD : Mono LCD 14"
  • XY-Auflösung: 20*26 μm (16K)
  • Lichtquelle: 405nm ParaLED® Matrix 3.0
  • Release Film: nFEP Film
  • Schichtdicke: 0.01-0.2 mm
  • Bedienbildschirm: 5"
  • Konnektivität: USB, Wi-Fi, Ethernet
  • Bauvolumen: 302.4 × 161.98 × 300 mm 
  • Druckergröße : 520 x 450 x 627 mm 
  • Druckergewicht: 29 kg

Benutzerhandbuch

Phrozen 3-Machine Spec Comparison

Which One Fits Your Workflow?

Mighty Revo 16K · Mighty Revo MAX · Mega 8K S — Spec Comparison

Spec Mighty Revo 16K Mighty Revo MAX Mega 8K S
Technical Specs
LCD 10.1" 16K 14" 16K 15" 8K
Light Source 405nm / COB + Fresnel Lens 405nm ParaLED® Matrix 3 0 405nm ParaLED® Matrix 3 0
XY Resolution 14 × 19 μm 20 × 26 μm 43 μm
Build Volume (mm) 211.68 × 118.37 × 235 302.4 × 161.98 × 300 330 × 185 × 300
Release Film nFEP (PFA) nFEP (PFA) *quick-release ACF Film
Heating System Chamber single-fan heating ★Chamber + Vat (Add-on Required) ✕
Heating Temperature 30°C 30°C ✕
Hardware Specs
Camera 720P ★1080P Vertical Camera + AI Color Calibration ✕
Resin Vat Capacity 0.67L ★2L (≈2.5 bottles) —*No MAX line marked, cannot be standardized measured (less than 2L)
Quick-Release Build Plate ✕ ✓ ✕
Quick-Release Film ✕ ✓ ✕
Quick-Release LCD ✓ ✓ ✕
AA (Anti-Aliasing) ✕ ✓ ✓
Power-Loss Resume ✕ ✓ ✕
Operating Screen 5" 5" (720p) 3.5"
Connectivity USB, Wi-Fi, Ethernet USB, WIFI, Ethernet USB, Wi-Fi
Rail Dual Rails (Ball Screw) Dual Rails (Lead Screw) Dual Rails (Ball Screw)
Machine Dimensions (mm) 353 × 345 × 517 520 × 450 × 627 472 × 380 × 566
Weight 18.2 kg 29 kg 26 kg
Technical Specs
LCD
16K10.1" 16K
Revo MAX14" 16K
Mega 8K S15" 8K
Light Source
16K405nm / COB + Fresnel Lens
Revo MAX405nm ParaLED® Matrix 3 0
Mega 8K S405nm ParaLED® Matrix 3 0
XY Resolution
16K14×19 μm
Revo MAX20×26 μm
Mega 8K S43 μm
Build Volume (mm)
16K211.68×118.37×235
Revo MAX302.4×161.98×300
Mega 8K S330×185×300
Release Film
16KnFEP (PFA)
Revo MAXnFEP (PFA)
*quick-release
Mega 8K SACF Film
Heating System
16KChamber single-fan
Revo MAX★ Chamber + Optional Heated Vat
Mega 8K S✕
Heating Temperature
16K30°C
Revo MAX30°C
Mega 8K S✕
Hardware Specs
Camera
16K720P
Revo MAX★ 1080P + AI Color Calibration
Mega 8K S✕
Resin Vat Capacity
16K0.67L
Revo MAX★ 2L
(≈2.5 bottles)
Mega 8K S—
*No MAX line, <2L, not standardized
Quick-Release Build Plate
16K✕
Revo MAX✓
Mega 8K S✕
Quick-Release Film
16K✕
Revo MAX✓
Mega 8K S✕
Quick-Release LCD
16K✓
Revo MAX✓
Mega 8K S✕
AA (Anti-Aliasing)
16K✕
Revo MAX✓
Mega 8K S✓
Power-Loss Resume
16K✕
Revo MAX✓
Mega 8K S✕
Operating Screen
16K5"
Revo MAX5" (720p)
Mega 8K S3.5"
Connectivity
16KUSB, Wi-Fi, Ethernet
Revo MAXUSB, WIFI, Ethernet
Mega 8K SUSB, Wi-Fi
Rail
16KDual Rails (Ball Screw)
Revo MAXDual Rails (Lead Screw)
Mega 8K SDual Rails (Ball Screw)
Machine Dimensions (mm)
16K353×345×517
Revo MAX520×450×627
Mega 8K S472×380×566
Weight
16K18.2 kg
Revo MAX29 kg
Mega 8K S26 kg

Häufig gestellte Fragen

Warum wir Revo MAX auf diese Weise gebaut haben

Was ist der Unterschied zwischen Revo MAX und Revo 16K?

Revo MAX ist für größere Drucke und höhere Leistung gebaut. Es hat ein 14" 16K LCD, eine 2L-Harzwanne, Kammerheizung und optionale beheizte Harzwanne Unterstützung für längere, stabilere Drucksitzungen.

Warum hat Revo MAX kein automatisches Harznachfüllsystem?

Revo MAX verwendet einen 2L-Harzbehälter, um das Nachfüllen ohne zusätzliche Pumpen oder Schläuche zu reduzieren. Dies hält die Einrichtung einfacher und hilft, Probleme mit dem Nachfüllsystem wie Lecks, Verstopfungen oder lose Schläuche zu vermeiden.

Wie hilft Revo MAX bei kalten Räumen oder hochviskosen Harzen?

Revo MAX verwendet Dual-Ventilatorkammerheizung, um die Harztemperatur stabil zu halten. beheizte Harzwanne hilft Harz fließen glatter während des Druckens.

Kann Revo MAX nach einem plötzlichen Stromausfall wieder drucken?

Ja. Wenn die Stromversorgung zurückkehrt, kann Revo MAX den Druck von dort aus wieder aufnehmen, wo er gestoppt wurde.

Wann sollte ich die Kammerheizung oder den erhitzten Harzbehälter verwenden?

Kammerheizung bei niedriger Raumtemperatur verwenden. beheizte Harzwanne bei hochviskosen Harzen, die einen besseren Verlauf benötigen. Die erhitzte Harzwanne unterstützt die Harzviskosität bis zu 4000 cps.

Beeinflusst der erhitzte Harzbehälter die LCD-Lebensdauer?

Die beheizte Harzwanne Es verwendet kontrollierte Heizung, um den Harzfluss aufrechtzuerhalten. Es hält die Durchschnittstemperatur bei 30°C oder darunter und hilft, übermäßige Wärmeeinwirkung in der Nähe des LCD zu vermeiden.

Wartung & Support | Wird es im Laufe der Zeit problematisch sein? 

Ist es schwierig, das LCD zu ersetzen?

Nein. Revo MAX verwendet ein schnelles LCD-Design, so dass Sie den Drucker nicht auseinander nehmen müssen. Der Drucker verfolgt auch die LCD-Lebensdauer und erinnert Sie daran, wenn er ersetzt werden muss.

Welche Releasefolie sollte ich mit jedem Revo MAX Harzbehälter verwenden?

Revo MAX hat zwei Fässer. Der Standard-Quick-Swap-Vat verwendet Phrozen PFA (nFEPQuick-Swap Release Film mit vorgeschnittenen Löchern und einer Silikonfolie; in der optional beheizten Wanne wird die passende, abziehbare Schutzfolie von Phrozen verwendet.

Sind Ersatzteile leicht zu finden und zu ersetzen? 

Schlüsselteile wie PFA-Film, LCDs und Harzbehälter sind über Phrozen und autorisierte Wiederverkäufer erhältlich. Quick-Release-Designs und Lifetime-Tracking erleichtern die Wartung.

LCD 3D Printer

Phrozen Sonic Mighty Revo 16K MAX LCD 3D-Drucker

€1.713,60

Druckvolumen

N/A

Druckgeschwindigkeit

N/A

XY-Auflösung

N/A

Schichtdicke

N/A

Lichtquelle

N/A

Lcd-Spezifikation

N/A

Betrieb

N/A

Slicer-Software

N/A

Kompatibles Dateiformat

N/A

Konnektivität

N/A

Druckerabmessungen

N/A

Druckergewicht

N/A

Stromrückführung

N/A

Systemleistung

N/A

Führungsschiene

N/A

Spindel

N/A

Trennfolie

N/A
Produkt anzeigen
//easify APP 隐藏价格括号//